Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Upland, CA
Gate installation in Upland means working with what the city actually has: mid-century ranch homes, Spanish-style estates north of Foothill Blvd, and newer HOA-governed developments in the 91784 hills. We install automatic gates, driveway gates, sliding gates, and electric gate systems that hold up to intense inland sun, dry Santa Ana winds, and clay soil that shifts posts out of alignment. If you’re dealing with a gate that’s racked, sagging, or simply beyond repair, call (866) 383-9857 for a free estimate.
Why Upland Homes Are Different
Upland’s housing stock runs heavily to post-WWII tract homes and custom 1950s-1970s ranches, and that shapes what we see on gate calls. North of Foothill Blvd, original wrought-iron and wood gates have weathered decades of UV exposure, wind-driven dust, and soil movement. Clay soil is the big one – it expands and contracts with moisture, and in Upland’s dry heat, it pulls away from posts in summer, then swells in winter rains. The result is hinges and latches that rack out of alignment, gates that drag on the driveway, and posts that lean. In the 91786 flats, after a Santa Ana event, we get a wave of calls for side-yard gates blown off their top hinges, especially on older wood gates. Newer homes in 91784, particularly in HOA communities, tend toward vinyl and ornamental metal with strict uniformity rules – so a replacement has to match the association’s approved look, not just function. Upland sits at the base of the San Gabriels, so summer highs above 95°F bake finishes and crack wood, while winter frost weakens older welds. A gate that works fine in a coastal city gets tested here in ways that show up as warped pickets, oxidized tracks, and dead operator boards.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Upland Services
Most Upland calls fall into two categories: a gate that’s physically broken, and a gate operator that won’t respond. Both are jobs we handle in-house, from the motor to the hinge.
Gate Repair in Upland
Older Upland gates, especially the original wrought-iron and wood gates on 1950s-1970s homes, rack and bind as clay soil moves posts. We repair hinges, latches, wheels, track systems, and structural members in place. If a wood gate near 91786 has split from years of sun and wind, we’ll assess whether the posts are still sound before recommending a repair or a sturdier replacement. We work on all nine of our supported operator brands, so when a repair involves the mechanical side only, we know how it should feel and sound. Gate Repair in Upland covers everything from a binding latch to a gate that’s off its track.
Electric Gate Repair in Upland
Upland heat is hard on electronics. Operators mounted in black metal boxes near the driveway can hit internal temperatures that stress circuit boards and transformers, and Santa Ana wind events push gates past their normal travel, which trips limit switches and overloads motors. We diagnose by brand-specific behavior – a Viking that hums but won’t move tells us something different than a Ghost Controls board with a dead keypad line. Our trucks carry parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Electric Gate Repair in Upland covers motors, boards, safety loops, keypads, and remotes.
Gate Installation in Upland
Gate installation in Upland usually starts with an honest conversation about what the existing gate and posts can support. On 1950s-1970s homes north of Foothill Blvd, we often see original wrought-iron driveway gates with posts that have shifted in clay soil, or wood gates that have baked and cracked after decades of summer sun. A new gate isn’t just a panel – it’s a system that has to stay square, swing or slide cleanly, and accept an operator if you want automation. We install residential and commercial gates, from single driveway swing gates to sliding estate gates and HOA-compliant replacements in 91784. If you’re comparing manual versus automatic, or need a gate built and installed from scratch, see our full Gate Installation page.
Automatic Gate Installation
Signs you need it
A driveway that currently has a manual gate you open by hand, or a gate that’s too heavy to operate safely anymore, is the starting point.
What it costs in Upland
Automatic gate installation in Upland typically runs $4,500-$12,000, depending on gate size, operator brand, and whether power and conduit already exist.
How we do it
We set or verify posts, mount the gate and operator, run power and low-voltage wiring, install safety edges and loops, then program and test travel limits and obstruction response.
Sliding Gate Installation
Signs you need it
A sloping driveway, limited swing clearance, or a commercial entry that needs a wider opening than a swing gate can provide points to a sliding gate.
What it costs in Upland
Sliding gate installation in Upland typically starts around $5,000 and can exceed $15,000 for long commercial runs with heavier steel and track work.
How we do it
We pour or anchor the track base, set the gate on rollers, mount the operator and rack, wire the safety loop and photo eyes, and test full travel repeatedly.
What Gate Installation Costs in Upland
| Item | Typical range in Upland |
|---|---|
| Pedestrian gate installation | $800-$2,500 |
| Automatic gate installation | $4,500-$12,000 |
| Sliding gate installation | $5,000-$15,000+ |
Do I need a permit to install a gate in Upland?
Most driveway and pedestrian gate replacements don’t require a building permit in Upland, but if you’re adding an automatic operator with vehicle detection loops or running new electrical, check with the city’s building division. HOA communities in 91784 may require design review first.
Can you match my existing gate style in Upland?
Yes. We match material, color, and style to your home’s era – wrought-iron for Spanish-style and mid-century ranches, and HOA-approved vinyl or ornamental metal for newer 91784 developments. A photo and a site visit are enough to start.
Brands We Service in Upland
We service and install operators from Ghost Controls, DoorKing, Elite, and Mighty Mule, among the brands we stock parts for on our trucks. We keep common boards, remotes, and safety edges in local inventory, so most Upland repairs don’t wait on a shipment. See our brands for the full list and what each does well.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Upland, CA
| Service | Typical range in Upland |
|---|---|
| Hinge repair/adjustment | $150-$400 |
| Latch or lock replacement | $100-$300 |
| Gate wheel or roller replacement | $150-$350 |
| Track realignment | $200-$500 |
| Operator motor replacement | $600-$1,800 |
| Circuit board repair/replacement | $300-$900 |
| Safety loop installation | $800-$1,500 per loop |
| Keypad/intercom replacement | $400-$1,200 |
| Pedestrian gate installation | $800-$2,500 |
| Automatic gate installation | $4,500-$12,000 |
| Sliding gate installation | $5,000-$15,000+ |
What pushes an Upland quote higher: clay soil that requires deeper posts or helical piers, gates with rusted structural members that need full replacement, and HOA communities where replacement materials must match a specific spec. We quote every job before work starts and don’t add surprise line items after the fact.
Neighborhoods We Serve in Upland
We work throughout Upland, from the older ranch tracts north of Foothill Blvd down to the 91786 flats and up into the HOA communities in 91784. Response time across the city is typically same-day or next-day for urgent repairs.
- North Upland (91784)
- Downtown Upland
- The Colonies
- San Antonio Heights
- 91786 flats
Service Area – Cities Near Upland
We also serve Montclair, CA to the west, Claremont, CA to the north, and Rancho Cucamonga, CA to the east. Ontario, CA is just south of the 10, and our trucks run there regularly for commercial gate work.
Serving Upland, CA – Our Local Coverage Area
We’re based in the Upland area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Upland
For urgent issues like a gate stuck open or a vehicle trapped inside, we’re usually on site in Upland the same day. For non-emergency installs and replacements, we schedule within a few days. A gate that won’t close is a security issue – we treat it as priority work, not a wait-and-see.
Many neighborhoods in 91784 do, especially newer developments with vinyl and ornamental metal standards. We’ll pull the HOA’s spec and match it exactly – material, color, and height – before ordering or fabricating anything. Getting it wrong means a redo, and nobody wants that.
Will you come out for a quote on a new gate installation in Upland?
Yes, we do free on-site estimates for new installations across Upland, including 91784, 91785, and 91786. The quote covers gate, operator if needed, posts, electrical, and safety edges. You get a written price before anything is ordered or built. Call (866) 383-9857 to schedule a time.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Upland Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Maria Guzman"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Marco Reyes"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Javier Torres