Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Fontana, CA
Gate installation in Fontana means working with steel that has spent decades under Inland Empire sun, grit-laden Santa Ana winds, and heat that regularly climbs past 100°F. Most of the work we do here is on older stucco tract homes with cinderblock perimeter walls and heavy driveway gates built from steel tube and wrought iron, not the vinyl and light aluminum you see in newer subdivisions. That changes how we measure, set posts, and choose operators. If you need a new gate or a straight answer on whether your current one can be rebuilt, call (866) 383-9857 for a free estimate.
Why Fontana Homes Are Different
Fontana’s housing stock runs heavily to post-WWII and 1960s-80s tract builds. Along the older streets of the 92335 and 92336 ZIP codes, you still find original steel driveway gates from that era swinging on hinges that have rust-welded themselves stiff, or hanging from posts set in cracked, root-heaved concrete. The gate itself may be salvageable, but the post footing often is not. We see this constantly: a homeowner calls about a sagging gate, and the actual problem is a post that shifted when the concrete pad underneath gave way years ago.
The climate compounds it. Fontana sits in a dry, wind-scoured corridor where heat cycling loosens welds and drives gates out of square. Dust and fine grit blown off the old steel-heavy industrial and rail corridors along the 92335/92336 divide jam rollers and grind tracks. This is not the marine-exposure rust Rancho Cucamonga or Ontario deal with. It is baked-on oxidation, seized pivot points, and metal that has been thermally cycled so many times it cracks rather than bends. Any installer or repair tech working Fontana has to account for that before the first cut is made.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Fontana Services
Fontana property owners call us for two things more than anything else: a gate that stopped moving, and a gate that never moved properly after the motor was installed. Both are covered below.
Gate Repair in Fontana
Older Fontana gates fail in predictable ways: hinge welds crack, the leaf drags on the concrete, the latch no longer seats because the whole frame has twisted out of square from heat cycling. We repair the full system, from the hinge barrel to the drop rod, and we diagnose first before any work is quoted. On Fontana’s cinderblock-wall properties, that often means re-setting a post in fresh concrete rather than slapping a new hinge on a shifting base. See the full scope of what we fix on the Gate Repair in Fontana page.
Electric Gate Repair in Fontana
Electric gate failures in Fontana are usually one of three things: a control board cooked by heat, a safety loop that no longer detects the car sitting on it, or a motor that has been fighting a warped, grit-jammed track for so long it burned out. We work on your brand, not from a generic checklist. Ghost Controls, Mighty Mule, DoorKing, Elite, Viking, FAAC, BFT, Linear, and LiftMaster each fail in their own patterns, and identifying the brand is step one. Details are on the Electric Gate Repair in Fontana page.
Gate Installation in Fontana
Gate installation in Fontana is not a one-size job. Most of the calls we get are for replacement gates on 1960s-80s tract lots where the existing steel has rusted through at the bottom rail or the post footings have cracked and shifted. The heat here bakes powder coating until it chalks, and the Santa Ana winds load the gate face with enough pressure to expose any shortcoming in post depth or weld quality. When we install in Fontana, we size the post footings for the soil and wind load, not just the gate leaf. We also make sure the operator is matched to the gate’s true weight in operation, which on an older hand-built steel gate is almost always heavier than the original spec plate claims.
We handle the full job: tear-out of the old gate and posts, new post setting, hanging and squaring, and automation if you want it. For a full breakdown of what a replacement involves, see Gate Installation.
Automatic Gate Installation
Signs you need it
You are opening and closing the gate by hand multiple times a day, or a previous operator failed and the gate now sits permanently open.
What it costs in Fontana
Automatic gate installation in Fontana typically runs $2,500 to $8,500 depending on gate weight, operator type, and whether new posts are required.
How we do it
We measure the gate’s actual swing weight, then set the operator, arm, safety loops, and control board to match that load rather than trusting a spec-plate estimate.
Driveway Gate Installation
Signs you need it
The existing driveway gate sags past the latch point, has rust through the bottom rail, or no longer closes square against the post.
What it costs in Fontana
Driveway gate installation in Fontana typically runs $1,800 to $6,500, with heavier wrought-iron and steel gates on the upper end.
How we do it
We pull the old gate and hardware, set new posts in properly sized footings, hang the new gate square, and adjust the hinges and latch for the site’s grade.
Sliding Gate Installation
Signs you need it
Your lot has a short driveway apron or a steep grade that makes a swing gate impractical, or the existing slide track is so worn the gate binds and jumps the rail.
What it costs in Fontana
Sliding gate installation in Fontana typically runs $2,800 to $9,000 depending on gate length, track condition, and the operator package.
How we do it
We lay out the track and cantilever path, set the guide posts and stops, then hang and weight-test the gate before mounting the operator and safety photo eyes.
Every install includes the operator and control wiring done by our own team. We do not sub out the electrical, and we do not leave a gate “manual for now” unless you specifically ask for that.
What Gate Installation Costs in Fontana
| Item | Typical range in Fontana |
|---|---|
| Driveway gate replacement | $1,800 – $6,500 |
| Automatic gate with operator | $2,500 – $8,500 |
| Sliding gate with track and operator | $2,800 – $9,000 |
How long does gate installation take in Fontana?
Most single driveway gates take one to two days on site. Post-setting concrete needs a day to cure before the gate is hung, so plan on roughly 48 hours total for a standard replacement.
Do you pull permits for gate installation in Fontana?
Fontana permit requirements depend on gate height, location relative to the right-of-way, and whether the gate is automated. We tell you exactly what applies to your property during the estimate, and we can pull what is needed. Call (866) 383-9857 to set up the free measure.
Brands We Service in Fontana
We are factory-familiar with nine gate operator brands, and in Fontana the calls are split between residential and light commercial lines. DoorKing and Elite setups appear on a lot of apartment and business entries, while Ghost Controls and Mighty Mule handle most of the single-family automatic gates. We carry control boards, safety loop sensors, remotes, and common hinge and wheel parts on the truck for those four brands, which gets most Fontana jobs turned around same-day or next-day. See our brands for the full line card.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Fontana, CA
| Service | Typical range in Fontana |
|---|---|
| Gate repair (hinge, post, latch) | $250 – $850 |
| Weld repair and re-square | $400 – $1,200 |
| Electric gate diagnosis | $85 – $200 |
| Control board replacement | $400 – $1,200 |
| Safety loop replacement | $450 – $950 |
| Motor replacement | $550 – $1,500 |
| Driveway gate installation | $1,800 – $6,500 |
| Automatic gate installation | $2,500 – $8,500 |
| Sliding gate installation | $2,800 – $9,000 |
In Fontana, the big price movers are post condition and gate weight. When a post has shifted in cracked concrete, that is a re-set, not a hinge swap, and it pushes the labor up. Heavy hand-built steel gates also load the operator harder, which means stepping up to a larger motor and a better board. What never changes: the price is quoted and agreed before any work starts, and that is the price you pay.
Neighborhoods We Serve in Fontana
We work across all of Fontana, from the older 92335 streets where original steel gates are still swinging on 1960s posts, to the newer sections of 92336 and the 92337 corridor where residents are upgrading to automatic driveway entry. Our trucks carry parts for the brands listed above, so most jobs do not require a second trip.
- Downtown Fontana and the original tract grid
- Southridge and the 92337 corridor
- Walnut Village and surrounding blocks
- North Fontana along the 92336 boundary
- Sierra Lakes and newer subdivisions
Response time for the greater Fontana area is typically same-day or next-morning for repair calls, and usually within 48 hours for install measures.
Service Area – Cities Near Fontana
We also run regularly into Bloomington, CA for older truck-yard and horse-property gates, Rialto, CA for work along the older industrial corridor, Glen Avon, CA for hillside lots with steep drive approaches, and Jurupa Valley, CA for the heavier estate and agricultural gates. If you are on the edge of Fontana, call and we will tell you straight up whether you are in our normal run.
Serving Fontana, CA – Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fontana
For most Fontana repair calls we are on site same-day or next-morning. Electric gate failures where the gate is stuck open or stuck closed get priority, since those are security issues. Call (866) 383-9857 and we will give you a real arrival window, not a four-hour spread.
It depends on your gate’s height, how close it sits to the right-of-way, and whether it is automated. Many simple replacements on existing posts do not need a permit, but we check the specifics for your lot before quoting. We will not install something that puts you out of compliance.
Yes. Most of our Fontana repair work is on gates we did not install. We diagnose the system as it sits, tell you exactly what failed and why, and quote the fix before any work begins. You do not need to know who put the gate in or where the original paperwork went.
If your gate is down or you are ready to plan an install, call (866) 383-9857 for a free estimate. We serve Fontana with a truck stocked for the brands we named, and we quote before we start, every time.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Fontana Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Doug Bennett"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
- Veronica Morales"What sold me was that he told me what NOT to do. I was ready to spend a lot more than I needed to and he stopped me. Ended up costing about a third of what I'd budgeted."
- Angela Lin